Improving Solar Still Efficiency Through Integration of Cellulose-Based Water Absorbers and Peltier Condensation Unit

Abstract

This study involves a series of experiments aimed at assessing the impact of incorporating water-absorbent materials on the productivity of solar stills. It is worth mentioning that the performed experiments examine the effects of both materials and their location inside solar still unit. The solar still used for the experiments comprised a black-painted metal case and a glass layer positioned at a 30 degrees angle relative to the horizontal. To enhance evaporation performance, a Peltier cooling module was integrated into the system. Furthermore, to prevent thermal losses and improve efficiency, the solar still case was insulated using Styrofoam material. From a scientific standpoint, the variations in this context can be ascribed to three primary variables as, integration Peltier condensation unit, use of water absorber materials like hemp and high-absorbent papers, and the incorporation of absorber dark colors. Throughout the experiments, constant test conditions were established using an artificial light source. In the reference setup, a total of 25 g of clean purified water was obtained, whereas in Case 5 (utilizing black high-absorbent papers on a triangle metal frame) and Case 6 (employing high-absorbent papers in the form of upright columns), which yielded the most efficient results, the amounts of purified water obtained were approximately 34 and 40 g, respectively. The results indicated a remarkable enhancement in thermal efficiency for Case 5 and Case 6, with approximately 29% and 45% increases, respectively, compared to the reference setup. Furthermore, a cost assessment has been conducted, demonstrating that the productivity gained through the use of internal materials contributes to improvements in cost efficiency. In comparison to the reference case, Case 6 exhibits a cost reduction for cost per liter exceeding 35%.